Disconnect Clips Slip Fitting Removal Tools Set of 5 Sizes 1/4", 3/8", 1/2", 3/4", 1" Fitting Slip Removal Tools

Product name: Push-fit Disconnect ClipColor: OrangeMaterial: PlasticSize: 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inchInstallation tips:1 Gently cut tubing squarely while maintaining tubing roundness.2 Remove abrasions & deformations from tubing exterior that may inhibit tight O-ring seal.3 If tubing’s already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) – To remove stiffener safely, release grip ring contact with disconnect clip while pulling stiffener with pliers.4 For easier install-Apply stiffener to flexible tubing types before inserting into the coupling.5 Mark 1” insertion depth on the tubing to indicate when tubing seats properly beyond O-ring.6 Push tubing beyond O-Ring for watertight seal - Observing mark ends up near coupling body.7 Disconnecting – While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.Note:1 Small products, please keep away from children to prevent swallowing.2 Manual measurement, please allow slight errors on size.You will received:5pcs Disconnect Clips

• Package included: 5pcs Disconnect clips. Using them, you can remove the push-fit fitting easily.
• 5-Size: 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch. You can choose the matching one according to the size of the push-fit fitting to meet your different needs.
• Material: Plastic. sturdy, light, resuable and convenient to carry.
• Installation: Just need to put a disconnect clip on the side of the push-fit fitting and gently push it, then the push-fit fitting can be removed easily.
• Aplication: Suitable for copper tubing, PEX, CTS and CPVC, and connects all three types in any combination.