Number Cloth Paste Student Number Embroidery Number Digital Patch Paste T-Shirt Clothing Numbers Iron on Patches

Clothes ironing patch 1. Please keep the back of the patch and the repaired clothes clean before use; 2. The back of the patch is equipped with transparent adhesive film, and the household hair straightener can be adjusted to a cotton file (120-150 degrees); 3. Place the patch where it needs to be modified (do not tear off the adhesive), and then press it back and forth several times, usually about 15 seconds; 4. In order to prevent scalding, it is recommended to put thin cotton cloth on the cloth (it can be an old T-shirt, which must not fade!! towel is not available), check whether the edge is hot after ironing, and iron the edge several times; 5. It is also necessary to determine the ironing time according to the thickness of the cloth. Thicker cloth is pressed longer. After ironing the front, press the back of the clothes several times; 6. After the temperature is cooled, the treatment is completed. be careful: 1. If you are worried that the patch will fall, please use a needle and thread to sew a few stitches on the edge of the wing. 2. It is recommended to be used for cotton and linen fabrics, sweater / rope / mesh / smooth or rough fabrics, and needle embroidery is recommended.

• Wide range of uses: repair old clothes, decorative clothes, jeans, hats, backpacks or other DIY craft projects embroidery decals
• Back glue design: the back of cloth paste is made with hot melt adhesive, which is sticky after heating; only need iron to heat it
• Easy to use: Iron patch repair clothes, a few minutes can be solved
• Personal advice: it is not recommended to use these patches on nylon or rayon fabrics
• No ironing: sweater / rope / mesh / etc. are inconvenient for ironing. It is recommended to sew with needle method