Pipe Dummy Plug Seal Kit for Ford F-Series 2003-2007 6.0L Powerstroke Diesel (F-250, F-350, F-450, F-550) - Direct Fit for Part AP0028

Pipe Dummy Plug Seal Kit for Ford F-Series 2003-2007 6.0L Powerstroke Diesel (F-250, F-350, F-450, F-550) - Direct Fit for Part AP0028Stop Oil Leaks Before They Cause Engine FailureThis pipe dummy plug seal kit is engineered as a direct replacement for Part AP0028, designed specifically for 2003-2007 Ford F-Series trucks (F-250, F-350, F-450, F-550) equipped with 6.0L Powerstroke Diesel engines. It replicates the factory seal's exact thickness (0.12"), hole alignment, and material properties to create a leak-proof seal on dummy plugs – eliminating oil leaks that trigger check engine lights (P0017/P0018 codes) and prevent engine damage.⚠️ FITMENT WARNING (READ BEFORE ORDERING) ⚠️✅ COMPATIBLE WITH:Ford F-Series: F-250 (2003-2007), F-350 (2003-2007), F-450 (2003-2007), F-550 (2003-2007)Engine: 6.0L Powerstroke Diesel (all variants)❌ NOT COMPATIBLE WITH:2008+ Ford Super Duty models (different seal design)Ford E-Series (van) or non-Diesel engines (e.g., 5.4L V8)Non-Ford vehicles (Chevy, Ram, Toyota)Older models (2002 or earlier)Why This Seal Kit Beats Generic "Universal" Kits100% Factory Match3D-scanned from genuine Part AP0028 to ensure exact hole alignment and thickness (0.12" – critical for leak-free sealing).Unlike universal kits that require cutting, this installs perfectly with no modifications.Engine-Tested DurabilityNitrile rubber withstands 250°F engine heat and diesel fuel exposure (tested in 1,000+ hours of real-world use).Oil-resistant compound prevents swelling in high-pressure diesel environments – no more "seal melt" failures.5-Minute DIY FixIncludes all seals (dummy plug, oil pan, valve cover) with pre-installed positions for easy alignment.Pro Tip: Clean dummy plug holes with degreaser before installation for 100% sealing.Critical Safety & Installation Notes⚠️ ALWAYS ALLOW ENGINE TO COOL – Hot engine surfaces cause severe burns.⚠️ Disconnect vehicle battery before starting to prevent electrical shorts.⚠️ Do not overtighten bolts (15-20 ft-lbs max) – crushes seals and causes leaks.⚠️ After installation, check for leaks at idle – if oil drips, verify seal seating.Package Includes1 x Pipe Dummy Plug Seal Kit (Part AP0028)WarrantyBacked by a 1-Year Satisfaction Guarantee. If the seal kit doesn’t fit or causes leaks, we’ll replace it or refund your money. Our US-based support team verifies fitment within 24 hours (send your VIN for confirmation).

• 【⚠️ CRITICAL FITMENT: 2003-2007 F-SERIES ONLY】 EXCLUSIVELY engineered for Ford F-Series trucks (F-250, F-350, F-450, F-550) with 6.0L Powerstroke Diesel (2003-2007). Not compatible with E-Series, Super Duty variants (2008+), or non-Diesel engines. Verify your truck's model year and engine before ordering.
• 【🔥 DIRECT REPLACEMENT FOR PART AP0028】 Precision-matched to the original OEM seal kit (Part AP0028) with identical thickness (0.12"), hole alignment, and material composition. Restores factory-level sealing on dummy plugs – eliminating oil leaks that cause engine damage and check engine lights.
• 【🛡️ INDUSTRY-STANDARD NITRILE RUBBER】 Made from high-temperature nitrile rubber (rated for 250°F) and oil-resistant compounds. Withstands diesel engine heat, pressure, and fuel exposure without cracking, swelling, or degradation – lasts 3x longer than generic seals.
• 【🔧 5-MINUTE INSTALL: NO TOOLS OR CUTTING】 Direct plug-and-play replacement – matches factory dummy plug positions with pre-installed seals. No cutting, gluing, or special tools needed. Installation time: 5 minutes (per Ford service manual).
• 【✅ PREVENTS $200+ ENGINE REPAIRS】 Replaces worn seals that cause oil leaks, leading to engine overheating, loss of oil pressure, and catalytic converter damage. Prevents costly repairs ($200+ average for Powerstroke engine damage).